Blomberg GSN 9583 A630 - Manual (Page 30)

29 GB
3. “Settings Menu...X” will appear on
the display, where X indicates the
time (in seconds) during which the
buttons need to be kept pressed.
4. After entering into the Settings
menu, press Function button ( 4) to
switch between the main menus.
You will switch to the next main
menu with each press of the button.
You will switch to the first main
menu if you press the Function
Button while you are in the final
main menu. (Language Selection,
Screen Brightness, Contrast
Setting, Auto Door Open, Display
mode, Volume, Water Hardness
Setting, Melody Settings, Factory
Settings?, Back to Prog. Menu)
5. Press “> - <” Selection Buttons ( 7)
to make changes in the submenus.
6. Press Confirmation Button ( 6) to
store your changes in the submenu.
7. “ ** Stored! **’” will be displayed
after you press the Confirmation
Button.
8. If you press Function Button
without making any changes in the
submenu, you will switch to the next
settings menu and submenu values
will not be stored.
9. Select “Back to Prog. Menu” and
press Confirmation Button to exit the
Settings Menu.
Time Delay, Start/Pause/Cancel Buttons
have no function in settings menu.
Pressing these buttons has no effect.
There are 10 different language options
in the Language Selection menu.
You need to adjust the Water Hardness
level to one of the following values
that suits the properties of your supply
system:
1- Lime free,
2- Very little limy
3- Less limy
4- Mediocre limy
5- Limy
6- Very much limy
You may determine the hardness level
of the supply water by means of the
hardness measurement kit supplied
together with the dishwasher. Please
refer to the Adjusting the Water Softening
System section in the user manual for
detailed information.
You may enable the dishwasher to warn
you audibly thanks to the Volume setting.
You can select one of the following
options:
0- Off
1- Medium
2- High
You may adjust Screen Brightness
between 1 - 3.
You may adjust Screen Contrast
between 1 - 3.
You may adjust Melody between 1 - 4.
Auto Door Open
Unless you disable Auto Door Open
function, the door of your machine will
open automatically at the end of washing
cycle, providing a better drying efficiency