Blomberg GSN 9583 A630 - Manual (Page 27)

26 GB
Cancel Button ( 3) if you have to open
the door. Pause ( ) Indicator will
appear on the display. Then, open the
door. There may be a rush of vapor
when you open the door of your
machine; be careful. Close the door of
your machine and press Start/Pause/
Cancel Button again. Program will
resume running.
Your dishwasher will remain in
pause mode for about 15 minutes in
order to entirely remove the water in
the machine and on the dishes and to
protect the resin in the salt reservoir.
And then it will resume running in
drying mode and the drying step
indicator ( 17-d) will turn on.
When the program is over,
•
“ Finished” will appear on the
information line. End light will
turn on in Program Steps Follow-
up Indicator and remaining time
indicator will display 00:00.
Turn off your machine by pressing
•
On/Off button ( 1).
Close the tap.
•
Unplug the mains plug from the
•
wall socket.
Leave your dishes in the machine
•
for about 15 minutes after they
are washed in order to have them
cooled down. Your dishes will dry
in a shorter time if you leave the
door of your machine ajar during
this period. This will increase
the drying effectiveness of your
machine.
Program Selection
You can select the desired program
after turning on the machine by
pressing the On/Off button. To do this:
Press selection buttons ( > - < ) (7) to
select the desired program. If you do
not want to add auxiliary functions to
the program, press Start/Pause/Cancel
Button to start the selected washing
program.
Once the program starts to run, Time
Indicator will display the estimated
remaining time to the end of the
program.
Your machine performs water
softening depending on the hardness
level of the supply water. Remaining
time displayed towards the end in
some programs can be different from
the time indicated at the beginning due
to this process. The total time can also
change while the program is running
depending on the ambient temperature
where your machine is installed,
temperature of the supply water and
amount of the dishes.
Adding Auxiliary Functions to
the Program
You can change the washing program
as you prefer by adding auxiliary
functions to it.
Washing programs of your dishwasher
are designed to obtain the best
cleaning, considering the type of the
soil, soiling degree and properties
of the dishes to be washed. These