Blizzard Lighting RGBW ToughPar Satellight (Rev A) - Manual (Page 13)

Page 13
ToughPar Satellight Manual Rev. A © 2014 Blizzard Lighting, LLC
Red Intensity
1.) Push the “A” button until the LED display reads “P0-”.
2.) The right digit will be flashing. Use the “B” button to choose the intensity
level from 0-9 (0% <--> 100%).
Green Intensity
1.) Push the “A” button until the LED display reads “P1-”.
2.) The right digit will be flashing. Use the “B” button to choose the intensity
level from 0-9 (0% <--> 100%).
Blue Intensity
1.) Push the “A” button until the LED display reads “P2-”.
2.) The right digit will be flashing. Use the “B” button to choose the intensity
level from 0-9 (0% <--> 100%).
White Intensity
1.) Push the “A” button until the LED display reads “P3-”.
2.) The right digit will be flashing. Use the “B” button to choose the intensity
level from 0-9 (0% <--> 100%).
White Strobe Mode
1.) Push the “A” button until the LED display reads “P4-”.
2.) The right digit will be flashing. Use the “B” button to choose the rate from
0-9 (slow <--> fast).
Color Jump Mode
1.) Push the “A” button until the LED display reads “P5-”.
2.) The right digit will be flashing. Use the “B” button to choose the speed from
0-9 (slow <--> fast).
Color Fade Mode
1.) Push the “A” button until the LED display reads “P6-”.
2.) The right digit will be flashing. Use the “B” button to choose the speed from
0-9 (slow <--> fast).
P00
A B
Program Mode
Program 0-6
Options 0-9 Per
Each Program