beautypg.com

Getting started, Page 3 – Blizzard Lighting LED HighBeam User Manual

Page 3

background image

Page 3

HighBeam™ Manual Rev. A

© 2013 Blizzard Lighting, LLC

1. GETTING STARTED

What’s In The Box?

• 1 x HighBeam™ Professional LED PAR Fixture

• 1 x Awesome dual mounting Yoke with locking knobs

• 1 x All important power cord

• This Lovely User Manual

Getting It Out Of The Box

The Highbeam, it is sometimes used as a warning when you are speeding down the

highway towards a hidden cop. It can cause road rage if you forget to turn it off in

traffic. It is often a term of “endearment” when it is cold outside (see “Highbeams” in

UrbanDictionary.com). Now its name represents one of the coolest LED par cans on

the planet. Now that you’ve got your HighBeam™ (or HighBeams

remember High-

Beams are more useful in pairs that’s why cars have two)

, you should carefully unpack

the box and check the contents to ensure that all parts are present and in good condi-

tion. If anything looks as if it has been damaged in transit, notify the shipper immedi-

ately and keep the packing material for inspection. Again, please save the carton and

all packing materials. If a fixture must be returned to the factory, it is important that

the fixture be returned in the original factory box and packing.

Powering Up!

All fixtures must be powered directly off a switched circuit and cannot be run off a

rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer

channel is used solely for a 0% to 100% switch.

AC Voltage Switch - Not all fixtures have a voltage select switch, so please verify that

the fixture you receive is suitable for your local power supply. See the label on the

fixture or refer to the fixture’s specifications chart for more information. A fixture’s

listed current rating is its average current draw under normal conditions. Check the

fixture or device carefully to make sure that if a voltage selection switch exists that it is

set to the correct line voltage you will use.

Warning! . All fixtures must be connected to circuits with a suitable Ground

(Earthing).

Getting A Hold Of Us

If something is wrong, just give us a call or send an email. We’ll be happy to

help, honest.

Blizzard Lighting

N16 W23390 Stoneridge Dr. Ste E

Waukesha, WI 53188 USA

www.blizzardlighting.com

414-395-8365

Email: [email protected]

Disclaimer: The information and specifications contained in this document are subject

to change without notice. Blizzard Lighting™ assumes no responsibility or liability

for any errors or omissions that may appear in this user manual. Blizzard Lighting™

reserves the right to update the existing document or to create a new document to

correct any errors or omissions at any time. You can download the latest version of this

document from www.blizzardlighting.com.

Author:

Date:

Last Edited:

Date:

Stevie Ray

12/5/2013

Stevie Ray

12/5/2013