Bird Technologies 5000-EX User Manual
Page 35
Maintenance
23
"
Lay the DPM, display side down, on a clean surface.
"
Use a small screwdriver to remove all six screws
from the back cover.
"
Taking care to not disconnect the battery connector,
lift the back cover off, flip it over, and lay it, battery
side up, next to the front cover.
"
Remove the old batteries.
"
Install the new batteries checking the orientation of
the positive and negative terminals.
"
Make sure the battery connector is connected.
"
Taking care to not pinch the connector wires, put
the covers back together and screw into place.