Bird Technologies 5000-EX User Manual

Page 33

Maintenance

Erratic power
readings

Element
contact out of
alignment
(DPS)

Align the contact. It must
be far enough out to
make good contact with
the element, but must
not restrict entry of the
element body.

Damaged
element (DPS)

Replace element.

Sensor has lost
its zero (TPS)

Rezero sensor.

Sensor is
damaged

Replace sensor.

Unit will not
turn ON

Unit is using ac
power adapter
and was turned
OFF while the
back light was
illuminated.

Disconnect the ac
adapter connector from
the unit and wait for at
least 30 seconds, then
turn the unit ON.

PROBLEM

POSSIBLE

CAUSE

REMEDY