Bird Technologies 8255 - Manual (Page 14)

Power and
Utility Re-
quirements
These loads are passive devices that are self-contained
and require only RF input to function.
Environ-
mental Re-
quirements
These loads should be operated in a dust and vibration
free environment. Allow at least 6 inches (153 mm) of
clearance around the units to permit adequate heat dissi-
pation.
Items
Supplied
s Load Resistor
s Instruction Book
s Input Connector (refer to the specifications for
type of connectors supplied).
Items
Required
Matching connector on the coaxial transmission line to
which the load will be attached.
Tools and
Test
Equipment
A screwdriver and an adjustable wrench will be necessary
for disassembly of this equipment. A resistance bridge or
ohmmeter with an accuracy of one percent or better at 50
ohms is useful for checking the resistance value of the
RF section assembly.
Bird Model 8251/52/55 Termaline Coaxial Load Resistor
2