Bendix Commercial Vehicle Systems VORAD EVT-300 TROUBLESHOOTING - Manual (Page 2)

Fault Isolation Procedures
General Warnings
Before starting a vehicle:
1. Sit in the driver’s seat.
2. Place the vehicle in neutral.
3. Set the parking brake.
4. Disengage the clutch.
Before working on the vehicle or leaving the cab with the engine
running:
1. Place the vehicle in neutral.
2. Set the parking brake.
3. Block the wheels.
Do not operate the vehicle if the alternator lamp is lit or if the
gauges indicate low voltage.
Related Publications
For more information call 1-800-AIR-BRAKE in the U.S., Canada,
and Mexico.
Suggested Tools
NEXIQ Technologies 1-800-639-6774 www.NEXIQ.com
Part No. Description
104004 Pro-Link GRAPHIQ ™
208040 Multi-Protocol Cartridge (MPC)
804001 MPC Eaton System Software
501003A Data Cable
405048 6- and 9-Pin Deutsch Diagnostic Adapter
125032 USB Link ™ Vehicle Link Adapter
Bendix 1-800-AIR-BRAKE www.bendix.com
Part No. Description
ServiceRanger 2.8 PC-based Diagnostics
For EVT-300 specifi c ServiceRanger
questions call Bendix at
1-800-AIR-BRAKE
Standard Commercial Product
Volt/OHM Meter (VOM)