Bendix Commercial Vehicle Systems BA-921 COMP - Manual

1
Bendix
®
BA-921
®
Compressor Installation and Application Review
Bendix
®
BA-921
®
Compressor
Complete one Compressor Installation and Application Review Form for each fleet installation
arrangement (vehicle type/engine combination) and send to:
Bendix Commercial Vehicle Systems LLC
Attn: Hans Burkhardt – Product Engineer
Cc: Mark McCollough – Engineering Manager
901 Cleveland Street
Elyria, Ohio 44035
Note: Measurements should be made with commercial grade instruments with tolerances of 3% max.
CAUTION: When working on vehicles and/or carrying out testing procedures, always follow standard
industry safety guidelines, including the use of adequate eye protection, etc.
Compressor Part Number: ______________________________________________
Compressor Serial Number: _____________________________________________
Vehicle Make and Model: ______________________________________________
Engine Make and Model: ______________________________________________
Engine Serial/Unit Number: ____________________________________________
Submitted By: ______________________________________________
Employed By: ______________________________________________
Date Submitted: _____________________________________________
The following items should accompany this form:
• Attach any available air system schematic
• Attach available technical information for associated components
• Attach photos of the compressor installation
• Attach photos of the compressor air inlet hose arrangement
• Attach photos of the compressor governor arrangement
• Attach photos of any devices in the discharge line
• Attach photos of the air dryer
Page 1 of 18