Brother DCP-8045D - Manual (Page 60)

5 - 4 MAKING COPIES
Single or multiple copies using the scanner glass
You can make multiple copies using the scanner glass. Multiple
copies will be stacked (all copies of page 1, then all copies of page 2,
and so on). Use the Temporary Copy keys to choose more settings.
(See Using the copy keys (temporary settings) on page 5-5.)
1
Lift the document cover.
2
Using the document guidelines on the left, center the original
face down on the scanner glass and close the document cover.
3
Using the numeric keys, enter the number of copies you want
(up to 99).
For example, press
3 8 for 38 copies.
4
Press Start .
The DCP will start scanning the original.
Out of Memory message
If the Out of Memory message
appears, press Stop/Exit to cancel or
Start to copy scanned pages.
You will need to clear some jobs from
the memory before you can continue.
If you want to sort multiple copies, use the ADF.
(See Making a single copy from the ADF on page 5-3.)
If this error message appears more than once you may wish to
consider increasing the memory size. For more information on
how to increase the memory size, see Memory board on page
8-1.
Place the original face
down on the Scanner
Glass
Document
Guidelines
Out of Memory
Copy:Press Start
Quit:Press Stop