beautypg.com

Impositions and their setup – Baumfolder Impositions and their setups User Manual

Page 3

background image

Impositions and their setup

both sides).


4-Page

Par:

1

1. Fold up in number one plate ½ length of the sheet. Deflect other

fold plates in that section. Insert one thickness strip of paper you
are running in the number one gapset (both sides). Insert two
thickness of the same paper in the remainder of the gapsets.


4-Page Double Imposition Par: 1,2,3

2. Fold up in the number one fold plate ¼ the size of the sheet,

down in number two plate ¼ the size of the sheet, up in number
three plate ¼ the size of the sheet and deflect past number four
fold plate. Insert one thickness of the paper you are running in
the one, two, and three gapsets (both sides). Insert four
thickness of the paper you are running in the number four and
five gapsets (

6-Page Standard

Par: 1,3

3. Fold up in number one fold plate 1/3

rd

of the length of the sheet,

minus 1/8 inch and deflect past the number two plate and up into
the third fold plate 1/3. Deflect past number four plate. Insert one
thickness strip of paper you are running in number one, two and
three gapsets (both sides). Insert three thickness strips of the
paper you are going to run in number four and five gapsets (both
sides).


6-Page Accordion

Par: 1,2

4. Fold up in number one fold plate 1/3

rd

of the length of the sheet

and down in number two fold plate 1/3

rd

of the sheet and deflect

three and four plates. Insert one thickness strip of the paper you
are running in number one and two gapsets (both sides). Insert
three thickness strips of paper in the number three, four, and five
gapsets (both sides).


8-Page Parallel

Par: 1,2

5. Folds in number one fold plate ½ the length of the sheet and down

¼ of the length of the sheet and deflect numbers three and four
plate. Insert one thickness strip of the paper you are running in the
number one gapsets, (both sides). Insert two thickness strips of
the paper you are folding in the number two gapsets, (both sides).
Insert four thickness strips in the three, four, and five gapsets,
(both sides).

( continued )

Baumfolder Corporation 1660 Campbell Rd., Sidney, OH, USA 45365 1-800-543-6107 Copyright

г 2002