Bang & Olufsen BeoLab 7-1 - User Guide - Manual (Page 7)

Power Link
Mk 3
The two mains cords and the
Power Link cable are enclosed
with BeoVision 7.
Cable clamp: For safety reasons,
the mains cord from the wall outlet
must be secured to the loudspeaker.
To do so, tug the cord behind the
clamp.
Power Link cable: Do not use a
cable of the older type, as this
will cause noise, and therefore
not give optimum sound quality!
The new type has a triangular
mark on the plug.
Connection to BeoVision 7…
Connect the loudspeaker to one of
the Power Link sockets on the left
BeoVision 7 socket panel.
For further information about the
BeoVision 7 socket panels, refer
to the Guides enclosed with the
product.
Connection to other
Bang & Olufsen systems…
Use a Power Link cable of the
correct type to connect the loud-
speaker to a Power Link socket on
the Bang & Olufsen system.
For further information, refer to the
Guide enclosed with the system.
7
BeoVision 7
BeoLab 7–1