Bang & Olufsen BeoVision MX_4200 - User Guide - Manual (Page 47)

47
Maintenance of your television
Regular maintenance, such as
cleaning the BeoVision MX 4200, is
the responsibility of the user. To
achieve the best result, follow the
instructions to the right. Contact your
Bang & Olufsen retailer to determine
recommendations for regular
maintenance.
Any defective parts are covered by
the guarantee during the warranty
period.
Cleaning cabinet surfaces
Wipe dust off the surfaces using a dry, soft
cloth. Remove grease stains or persistent dirt
with a soft, lint-free, firmly wrung cloth,
dipped in a solution of water containing only
a few drops of mild detergent, such as
washing-up liquid.
About the contrast screen
Use a mild window cleaning fluid to clean the
screen. To retain the optimum performance of
the screen, make sure that no streaks or traces
of the cleaning fluid are left on the screen.
Cleaning the Beo4
Wipe the Beo4 remote control with a soft,
lint-free, firmly wrung cloth.
Changing the Beo4 batteries
When BATTERY appears in the Beo4 display, it
is time to change the batteries in the remote
control.
The Beo4 requires three batteries. We
recommend that you use 1.5 volt (size AAA)
Alkaline batteries only. Replace the batteries
as shown on this page. Keep a finger on top
of the batteries until the lid is replaced.
When you have replaced the batteries, you
must wait about 10 seconds until TV appears
in the display. The Beo4 remote control is
then ready for use. 1
2
3
1
2
Never use alcohol or other solvents to clean any
part of the television! If the front screen glass
should crack or chip, or if it should be damaged in
any way, it must be replaced immediately, as it
could otherwise cause injury. You can order
replacement front screen glass from your Bang &
Olufsen retailer.