Bang & Olufsen BeoVision Avant (No tuner) - User Guide - Manual (Page 30)

30
Adjust sound and picture settings
Adjust sound settings
Adjust sound settings via the SOUND menu.
Temporary settings are cancelled when you
switch off the television.
If you choose to enable eco mode, all wired
speakers in a speaker group that do not
receive a signal will switch off and save
power.
In the AUDIO DESCRIPTION menu, you can
set the television to describe what happens
on the television screen by means of sound.
Remember to enable the VISUALLY
IMPAIRED menu field in the LANGUAGES
menu under REGIONAL SETTINGS.
Adjust picture settings
Adjust the picture settings via the PICTURE
menu. Temporary settings are cancelled
when you switch off the television.
In the PICTURE ADJUSTMENT menu, you can
bring up an ADVANCED SETTINGS menu
where you can make different settings for
the selected source. For example, you can
reset picture settings. Press
INFO to bring up
help texts for the menus.
To temporarily remove the picture from the
screen, press LIST then or to bring up
PICTURE OFF in the BeoRemote One display
and press the
centre button. To restore the
picture, press TV.
Sound and picture settings are
preset from the factory to neutral
values which suit most types of
programmes. However, if you
wish, you can adjust these
settings to your liking.
Adjust sound settings such as
volume, bass and treble and, for
wired speakers, enable eco
mode. Picture settings include, for
example, contrast, brightness,
colour, and viewing distance.
Change your sound and picture
settings temporarily – until your
television is switched off – or
store them permanently.
Activate different picture modes,
for example, game mode if you
connect a game console to your
television.
For information about how to change
the picture format,
see page 32 .
MENU
SETUP
SOUND
SOUND ADJUSTMENT
…
MENU
SETUP
PICTURE
PICTURE ADJUSTMENT
…