Bang & Olufsen BeoVision 4-37/44 - User Guide - Manual (Page 36)

To change volume, bass, treble or loudness…
> Press MENU to bring up the main menu.
> Press 3 to bring up the Setup menu.
> Press 2 to bring up the Sound* menu.
> Press GO to bring up the Adjustment menu.
> Press l or n to move between menu
items.
> Press m or p to adjust the settings for each
item.
> Press EXIT to store your settings until you
switch off BeoVision 4, or…
> …press GO to store your settings permanently.
The content of the ‘Sound’ menu depends on how
many speakers are connected.
Change volume, bass, treble or
loudness
You can adjust sound volume, select a speaker
combination or adjust the speaker balance
directly on Beo4 at any time without bringing
up a menu, but you must bring up the Sound
menu in order to be able to adjust bass,
treble or loudness.
>> Adjust picture and sound settings
Setup
1 Tuning
2 Sound
3 Picture
4 Connections
5 Menu
6 Clock
Sound
1 Adjustment
2 Speaker type
3 Speaker distance
4 Speaker level
5 Speaker mode
6 Sound system
Counter Tape Speed PDC&VPS Marker
Time used 240 SP On On
Volume Bass Treble Loudness
32 0 0 On
36
*NOTE! The Sound menu lets you calibrate your
surround sound speaker setup permanently. For
further information, refer to the chapter
‘Loudspeaker connections – surround sound’ on
page 13 in the Reference book.