Brother NC-9100H - Manual (Page 160)

APPENDIX A - 14
NC9100h_FM6.0
Function Table and Default Factory Settings
LEVEL
ONE
LEVEL
TWO
LEVEL THREE OPTIONS OPTIONS
FACTORY
SETTING
6.LAN 1.Setup
TCP/IP
1.BOOT Method Auto/ Static/ RARP/
BOOTP/ DHCP
Auto
2.IP Address [000-255].[000-
255].[000-255].[000-
255] [169].[254].[001
-254].[000-255]
3.Subnet Mask [000-255].[000-
255].[000-255].[000-
255]
255.255.0.0
4.Gateway [000-255].[000-
255].[000-255].[000-
255] 000.000.000.000
5.Host Name BRN_XXXXXX=(last 6
figures of Ethernet
address)
(up to 15 characters)
BRN_XXXXXX
BRN_XXXXXX
6.WINS Config Auto/ Static Auto
7.WINS Server (Primary)
000.000.000.000 (Secondary)
000.000.000.000 000.000.000.000
8.DNS Server (Primary)
000.000.000.000 (Secondary)
000.000.000.000 000.000.000.000
9.APIPA On/Off On
2.Setup
Internet 1.Mail Address (60 characters)
brnXXXXXX@e
xapmle.com
2.SMTP Server [000-255].[000-
255].[000-255].[000-
255]
Name
(up to 30 charac-
ters) 000.000.000.000
3.POP3 Server [000-255].[000-
255].[000-255].[000-
255]
Name
(up to 30 charac-
ters) 000.000.000.000
4.Mailbox Name (up to 20 characters)
5.Mailbox Pwd
Password:****** Verify:******
3.Setup
Mail RX 1.Auto Polling On/ Off
On
2.Poll Frequency xxMin 10 Min
3.Header All/ Subject+From+To/
None None
4.Del Error Mail On/ Off On
5.Notification On/ MDN/ Off Off
4.Setup
Mail TX 1.Sender Subject Internet Fax Job
2.Size Limit
On/ Off Off
3.Notification On/ Off Off
5.Setup
Relay
1.Rly Broadcast On/ Off Off
2.Relay Domain RelayXX:
3.Relay Report
On/ Off Off