Atomos Ninja 2 - Manual (Page 16)

Audio In
Audio In
is in the bottom left corner of the screen, just below
Headphone Monitoring Level
.
There are four small squares, each of which represents an audio input.
Inputs 1 and 2 are the two digital embedded inputs which come via the
HDMI. Inputs 1 and 2 A are the two analogue stereo line level inputs.
Audio Frame delay will allow you to compensate for out of sync audio/
video with certain DSLRs, for example the Nikon D800. These four
squares also act as approximate level and “signal present” indicators.
Touching the
Audio In
icon takes you to the
Audio In
page,
where you can choose to record from either HDMI or the analogue
inputs, or both, for a four-channel audio recording. There is also a slider
to control the analogue gain.
It is not possible to vary the gain if the signal input is from the
HDMI connection because this is digital and is embedded in
the signal. You can usually adjust this from the camera, see
your cameras manual for operational details.
Atomos Ninja-2 – User Manual Edition 3: May 2013 14
7. Using the Ninja-2
cont.