Atomos Samurai Blade - Manual (Page 24)

Atomos Samurai Blade – User Manual Edition 1: June 2013 22
SmartLog
SmartLog gives you the ability to tag your clips during recording (or
playback, more on this later).
By the pressing the
Favourite
and
Reject
icons you can
assign a “good clip” or “bad clip”. This information can then be
imported into a non-linear editing system to speed up the edit
process, as you can easily see which parts of your recording you
have marked to keep or reject.
SmartLog currently only works with Apple FCP X.
How to use in Record and Monitor mode
To access tagging press the
Cut and Tag
on the home screen.
You can now see your monitor in the background and the
Favourite
and
Reject
icons for marking clips while recording.
When you have selected Favourite, the icon colours will invert (Green
background with white text) and the Reject Icon will disappear. When
Reject is selected the icon colours will invert (red background with white
text) and favourite will disappear.
How to use in Playback mode
To review and use the
Cut and Tag
feature in playback mode, press
on the Play icon on the bottom of the screen.
From the Playback screen, select a clip from the Media source page by
directly pressing it and it will become available for marking.
To access tagging press the
Cut and Tag
on the home screen.
The
Favourite
and
Reject
icons will appear on screen.
Press Play and when you see the section of the footage you would like to
mark as good or bad, press
Favourite
or
Reject
and then press
again to stop marking that section.
A green or red line will appear in the timeline scrubbing bar so you can
idenify the region that has been selected.
Removing tagged clips
To clear all marking point clips, press on the Clear Tagging icon below the
Home screen icon.
8. Monitoring and Recording
cont.
MONITORING MODE: CUT AND TAGGING FOR EASY CLIP SELECTION WHEN EDITING
MONITORING MODE: CLIP MARKED AS A GOOD TAKE
Favorite Reject
Cut and Tag icon
Cut and Tag icon
Clear Tagging icon
Playback icon