AJA Ki Pro Mini - Manual (Page 9)

1
9 Ki Pro Quick Start Guide— Summary
"WARNING Media Low" will appear when the media only has 15% of capacity remaining.
Media must be switched out when it reaches 10% of capacity. With 10% of media
remaining, the "WARNING Media Full" prompt will appear.
"WARNING Media in Use" may appear if you try to remove the media by pushing the
SLOT button while an operation is still taking place. Wait for the operation to finish and
then try again.
"WARNING Media Not Present" may appear if media has been physically removed and
the user hits the slot button.
"WARNING Media Unformatted" may appear if Ki Pro Mini does not recognize the file
system on the CF card or the CF card has never been formatted.
"WARNING Storage Removed" will appear if the media is removed without first hitting
the SLOT button to properly unmount media. In the event this happens, media
immediately re-inserted into the Ki Pro Mini may show clips as "N/A" and subsequent
recordings may not be possible. To resolve this issue, mount the drive on an Apple
computer under Mac OSX, then re-insert the media. If it does not read properly, you will
need to format the media.
"WARNING Backup and Reformat" may appear if media has issues being mounted by the
Ki Pro Mini. As the prompt indicates, it is best to back up the media by copying it to
another drive or disk array and then reformat the media. Some signs that the media is in
a read-only state: even though clips have been recorded to the media, "N/A" appears in
the clip area of the UI, "Loading" appears in the clip area of the UI but does not
eventually load a clip, or hitting the record button with all settings correctly configured
for the Ki Pro Mini does not result in a recording.
“WARNING Name in Use” appears if the clipname specified in the naming parameters
already exists on the CF card. This also happens when take 999 is reached and no more
take numbers are available. Ki Pro Mini will refuse to overwrite the clip; you will have to
delete the clip or select a new name.
“WARNING Non VFR Format” appears if you choose VFR for 1.1 Record Type but no VFR
data is detected on the video input.
“WARNING No Clip Name” appears if you attempt to record in gang mode usinga non-
existent custom clip name.
“WARNING No Video Input” appears if you attempt to record and there is no video
detected at the video input.
“WARNING Genlock Missing” appears if you choose “Input” for 6.1 Genlock and you
attempt to play a clip and no genlock is detected on the selected input.
Summary
This brief overview is not meant to replace the detailed information found in the latest Release
Notes document or Ki Pro Mini Manual. It is simply a quick reference for some of the basic
operations of Ki Pro Mini that may be especially useful for the first time user. Please refer to the
Ki Pro Mini Release Notes and Manual for detailed descriptions and information.