Brother MFC-3360C - Manual (Page 9)

Setting Up the Machine
7
7 Set Your Country
(For Australia / New Zealand
Customer Only)
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
1
Check that the power is turned on by
connecting the power cord.
Press OK.
Set Country
q
Press OK Key
2
Press a or b to choose the country
(Australia or New Zealand).
Australia e
q
Select a b & OK
3
Press OK when the LCD shows your country.
4
The LCD prompts you to make sure of the
country again.
Australia?
q
1.Yes 2.No
5
If the LCD shows the correct country, press
1 (Yes) on the dial pad and go to the next step.
Or press 2 (No) on the dial pad and go back to
step
2 to choose the country again.
6
After the LCD shows Accepted for two
seconds, the machine will restart automatically.
After the restart, the LCD shows Please
Wait.
8 Installing the ink cartridges
Warning
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
1
Make sure that the power is turned on.
The LCD shows:
No Cartridge
2
Open the ink cartridge cover (1).
3
Pull all the lock release levers down and
remove the yellow protective part (1).
Note
Do not throw away the yellow protective part. You
will need it if you transport the machine.
1
11