Buffalo Technology WYR-G54 - Manual (Page 32)

32
RIPv1 Routing - RIP dyanmic
routing allows routing informa-
tion to be shared with out ther
routers using RIPv1 routing.
This will allow easy sharing of
information between multiple
routers in regards to their own
resources or stored entries
within their routing tables. This
improves the overall perfor-
mance within a complex set of
separate networks.
Static Routes - Static routes can be added to the routing table to facilitate routing amongst
devices. By entering the necessary IP Information about a property and a metric to specify the re-
quired number of hops between routers to reach a device, the most effi cient path can be calculated
among multiple routers. The values entered for the IP Address, Subnet Mask and Gateway should
be the IP information of the remote network device that is being routed to by the AirStation.
Routing Information
Routing
Information