Braun ULTRA SERIES 05 L200UARS - Manual (Page 46)

Page 44
Maintenance is necessary to
ensure safe and troublefree lift
operation. General preventive
maintenance consisting of
inspections of your lift system and
cleaning the lift should be a part
of your routine.
L200UARS Series lifts are
designed with many self-lubricat-
ing components. Lubricate the
pivot points specified on opposite
page approximately every four
weeks (or 100 cycles) with a light
penetrating type oil (30 weight or
equivalent). Severe conditions
(weather, environment, heavy
usage, etc.) may require more
frequent lubrication.
Preventive maintenance visual
inspections and lubrication
procedures do not take the place
of the procedures specified in the
Maintenance and Lubrication
Schedule provided in the appli-
cable lift installation and service
manual. The procedures outlined
in the Maintenance and Lubrica-
tion Schedule must be per-
formed at the recommended
scheduled intervals by an
authorized Braun Corporation
service representative who has
attended and been certified by
The Braun Corporation Sales
and Service School.
If the scheduled maintenance and
lubrication procedures are not
being performed, or if there is any
sign of lift damage, wear, abnor-
mal condition or improper opera-
tion, discontinue lift use imme-
diately. Contact your sales
representative or call The Braun
Corporation at 1-800-THE LIFT.
One of our national product
support representatives will direct
you to an authorized service
repairman who will inspect your
lift.
Maintenance and Lubrication
WARNING
Maintenance and
lubrication proce-
dures must be per-
formed by authorized
service personnel as
specified in the
applicable installa-
tion/service manual.
Failure to do so may
result in serious
bodily injury and/or
property damage.