Braun ULTRA SERIES 05 L200UARS - Manual (Page 17)

Page 15
Lift Features
Become familiar with all lift fea-
tures and the proper operation of
the lift components before at-
tempting lift operation. Refer to
the Lift Terminology Illustration on
page 2 for identification of specific
lift components if not clearly
depicted in this section. Contact
The Braun Corporation at 1-800-
THE LIFT immediately if any of
this information is not understood.
Unfold and Fold: Series 05 lift
models are equipped with
electric fold actuators that
feature a built-in overload clutch
that slips (ratchets) when it
reaches the end of its stroke
(during unfolding and folding
functions). The ratchet (audible
clicking) signals the lift operator
that the platform has reached
the fully unfolded position or the
fully folded position.
When pressing the orange
UNFOLD (Out) switch to unfold
the platform from the stowed
position, the lift operator must
continue to press the switch
until the actuator ratchets
(makes audible clicking). The
clicking sound indicates the
powered whale is fully unfolded
(deployed). If the actuator does
not ratchet, the whale has not
reached the fully unfolded
position and the lift may be
damaged when lowering or
raising the platform.
Note: The platform must be in
CAUTION
Press UNFOLD switch
until actuator makes
audible clicking
sound (ratchets).
Failure to do so may
result in lift damage.
the fully raised position before
the platform can be folded or
unfolded. If the platform does
not unfold when the UNFOLD
switch is pressed or the platform
does not fold when the FOLD
switch is pressed, press the UP
switch momentarily and try
again.
Pre-Lift Operation Notes and Details