Buffalo Technology WLI2-CB-G54L - Manual (Page 27)

27
◗ The wizard will search for any available AOSS Access Points. If you haven't already initiated the
AOSS Access Point you may do so now; the wizard will wait until an AOSS Access Point is initiated.
■
NOTE: AOSS mode will stay active for a period of two minutes. This is the time-slot required to
initiate the wireless client adapter.
◗ AOSS will communicate with the Access Point and automatically configure a secure connection,
using the highest security level available for the two devices. If additional devices are added, the
security level of all devices will adjust to accomidate the device with the lowest security standard.
Thus, the entire network uses the highest level of security possible amongst all devices.
◗ A confirmation page will appear momentarily. Client Manager will return to the 'Status' Screen
where it will renew an IP address. Please wait for the renew process to complete (~30 seconds).
Once complete the connection has been made and is stored for later use as well. You can press
the 'X' on the client manager to close the screen. You may now access the network and/or Internet
through a secure wireless connection.
Using AOSS