Buffalo Technology WLI2-CB-G54L - Manual (Page 25)

25
■
NOTE: AOSS automatically creates a secure connection
to your AOSS Access Point. You must have a Buffalo
AOSS enabled Access Point or Router to use AOSS on an
AOSS enabled wireless client device.
◗ Start Client Manager by right clicking on the Icon in your
system "Tray", or by launching the Client Manager from you
Start Menu. (Programs => Buffalo =>AirStation Utility =>
Client Manager)
AOSS (AirStation One-Touch Secure System) is a simple, one-touch setup for connecting wireless
clients to an access point while setting up the most secure possible connection. Users no longer
need to worry about choosing the proper security protocols, IP addresses, or SSID's. The
intelligence of AOSS determines the most optimal connection and configures itself in seconds.
Using the Quick Setup Guide for your client device, please install the drivers and client manager
software. Once complete, the following steps will guide you in using Buffalo's Client Manager
software to initiate an AOSS connection.
It is recommended to shut off any personal firewalls on your PC (such as Zone Alarm, Microsoft
Personal Firewall, Norton Internet Security, etc.). These programs may cause issues with the
AOSS setup procedure. They may be re-enabled after the AOSS process has been completed.
Using AOSS
Using AOSS