Buffalo Technology WLI2-CB-G54L - Manual (Page 26)

26
◗ From the Main Status Screen, Select the
"Profiles" tab.
◗ Click on the AOSS button to initiate your
AOSS session. The AOSS wizard will begin and
guide you through the automatic AOSS process.
◗ Initialize AOSS mode on the AOSS Access
Point. This is done by pressing the AOSS
button on the Access Point. Typically the button
will need to be pressed for 3-5 seconds until the
AOSS light on the Access Point begins to flash.
Please consult the Quick Setup Guide or the
AOSS Supplement Guide that came with your
Access Point for more information.
Using AOSS