Brother HL-3400CN - Manual (Page 61)

CHAPTER 3 BEFORE WORKING WITH THE PRINTER
3–7
Printer Settings
There are two types of printer settings available on this printer:
1. User
Settings
2. Factory Settings
You can operate the printer with the factory default settings with the
control panel settings unchanged. You may change and store personalized
settings in the printer memory as user settings.
Remember, User Settings will replace the Factory Default Settings. The
new User Settings will remain effective until new settings are made, or
the Factory Default Settings are restored.
User Settings
Although the printer settings have been set at the factory, you can change
them with the control panel buttons. Your changes will be stored in the
printer's memory as “User Settings.” They are recalled every time you
turn on the printer.
In addition to the current settings, you can save two more sets of User
Settings with the
Mode button and restore them with the Reset button.
The current settings are cleared after restoring one of the saved user
settings.
Factory Settings
The printer settings have been set at the factory before shipment. They
are called “Factory Settings.” Although you can operate the printer with
these factory settings unchanged, you can tailor the printer by making
User Settings.
✒ Note
Changing the User Settings does not affect Factory Settings. You cannot
modify the preset Factory Default Settings.
Factory default settings can be restored via the
Reset button. For more
information, see “RESET Button” in Chapter 4.