Brother DCP-310CN - Manual (Page 13)

1 - 4 INTRODUCTION
Status LED indications
The status LED (Light Emitting Diode) is a light that shows the DCP
status.
LED DCP status Description
Off
Ready The DCP is ready for use.
Red
Cover open The cover is open. Close the cover. (See Error
messages on page 5-1.)
Ink empty Replace the Ink cartridge with a new one. (See
Replacing the ink cartridges on page 5-20.)
Paper error Put paper in the tray or clear the paper jam.
Check the LCD message. (See Troubleshooting
and routine maintenance on page 5-1.)
Out of memory Memory is full. (See Error messages on page
5-1.)
Others Check the LCD message. (See Troubleshooting
and routine maintenance on page 5-1.)