Yamato Scientific WG201 Water Purifiers - Manual (Page 26)

-24-
Run Menu
Run Menu
Run menu as follows when you are ready for operation.
1. Power-on
1 Switch ON the earth leakage circuit breaker.
2 Push the POWER switch after a few seconds.
● The POWER, an operational indication lamp of green
color, is lit.
● The lamp which shows the quality of ion-exchanged
water in the indicator is lit.
2. The distillation starts after supply of boiler water.
● The DISTILLATION, an operational indication lamp of
green color, is lit.
3. The distillation stops after distilled water tank is full of water.
● The DISTILLATION, an operational indication lamp,
goes out.