Yamato Scientific BO600 Water Baths/Oil Baths - Manual (Page 19)

17
5. Maintenance
Daily maintenance
Do not disjoint the unit
Never remodel the unit. There are some
high-voltage areas inside the unit, which
could cause electric shock. Request Yamato
Scientific for internal check, adjustment or
repair.
For maintenance
For your safety, be sure to turn the power switch off (on the back side) and pull the power cord
out for maintenance. You must wait unit the inside temperature of the unit goes down to normal.
Wipe off any or excess dirt on the packing and the operation panel with a soft dry cloth. Do not
use benzine, thinner or cleanser to wipe or scrub with a brush. This could cause change in
shape, quality or color.
When you do not use the unit for a long period of time, or
dispose of it
When the unit is not in use for a long period of time.
Turn the power switch off and pull the power cord out for safety. When the unit is not use for a
long period of time. Be sure to drain the tank.
When you dispose of the unit
Do not dispose of and leave the unit in child playground etc.,
When you suspect “trouble”?
Situation Make Sure
The display on the operation panel
is not lit even when the power
switch is on.
● If the power cord is connected firmly to an outlet
● If there is no power failure
＊When you repeatedly switch on and off, the display does not
light up sometimes. Wait for a few seconds, and switch on
again.
If you have any question, contact Yamato Scientific.