Wood’s Powr-Grip VL2MAN - Manual (Page 13)

Rev 1.0/12-12 11 VL2MAN: #35159
W
HEN THE
L
IFTER IS
N
OT IN
U
SE
Use the hoisting equipment to gently lower the lifter onto a stable support; then detach the
hoisting equipment hook from the lift eye.
CAUTION: Do not set the lifter against any surfaces which could soil or damage the
vacuum pads.
If the lifter is transported to another location, use the original shipping container and secure the
lifter so as to protect the vacuum pads and all other components from damage while in transit.
Storing the Lifter
Use the covers supplied to keep the vacuum pads clean.
!!-CE-!! In accordance with CE Standard EN 13155, the lifter is designed to rest on relatively
horizontal surfaces without tipping over. To store the lifter in this way, set the lifter with the
pads facing downward on a clean, smooth, flat surface.