Using the remote control, Eng lish, Power on, power off and standby switching inputs – BenQ DV2050 User Manual

Page 22

Using the Remote Control

Eng
lish

Using the Remote Control

Power on, Power off and Standby

Switching Inputs

Turning on the TV

1. After the power cord is plugged into a wall outlet, the

TV will turn on and enter standby mode automatically,

and the power indicator will light up in red.

2. Press the

button on the TV, or press the POWER

button on the remote control. The TV will turn on, and

the power indicator will light up in green.

3. The TV will automatically search for a signal. If the set is

already connected to a signal source, the TV will display

that signal.

Turning off the TV
Press the

button on the TV again, or press the POWER

button on your remote control again, and the TV will go

into standby mode. (The power indicator will turn red).

1.Turn on all connected equipment.

2. Press the INPUT button on your TV or press the

INPUT button on your remote control to select input

signal.

Press the input button repeatedly until your desired input

is displayed. The sequence is as follows- TV, VIDEO, Y C

, TV, VIDEO...