Eng lish, Main unit (rear view) – BenQ DV2050 User Manual
Page 12

Getting to Know Your TV
4
Eng
lish
Main Unit (Rear View)
3 Channel ()/()
• These two buttons allow direct selection of channels.
• When the OSD main screen is active, pressing these buttons allows
selection of options.
4 Volume ()/()
• Press Volume to increase the volume, or Volume to decrease it.
• When the OSD main screen is active, pressing these buttons allows
selection of settings.
5 MENU
Press this button to display the on-screen display (OSD) menu. Press
this button once again to close the OSD menu.
1
2
3
5
6
4
No. Name
Description
1 ANTENNA/CABLE Connect your antenna (not provided) to this input.
2 AV1
• VIDEO (Composite (AV) signal input, RCA connector): Connect
the Composite video output of your AV device here.
• AUDIO(Audio input, L/R): Connect the audio out of your AV
device here. This input is used common to both AV and S-VIDEO
input.
• S-VIDEO (S-VIDEO input): Connect the S-VIDEO OUT of your
AV device here.
3 COMPONENT
• Y C
B
/P
B
C
R
/P
R
(Y C
B
/P
B
C
R
/P
R
input): Connect the component
image output of your AV devices or HDTV decoder here. The Y
(green) connector can also be used as a second composite signal
input.
• AUDIO(Audio input, L/R): Connect the audio out of your AV
device here.
4 AUDIO OUT
Connect the audio input of an amplifier or here.
5 DOWNLOAD
This terminal is for service purpose only.
6 AC INLET
Connect the power cord (provided) to this input.