Western Digital My Net N900 Central User Manual - Manual (Page 34)

BASIC SETTINGS AND TASKS
30
MY NET N900 CENTRAL
USER MANUAL
Note: The label on the bottom of the router displays the default PIN. You can
change the PIN on the Wi-Fi Protected Setup screen. (See “Advanced
WAN (Internet) Category” on page 38.) Once you change the PIN, the
default value is invalid unless you reset the router to default values.
3. Click Next.
Connecting a Device That is Not WPS Enabled
1. On the Add a Wi-Fi Device screen (above), click the Click here to connect by
entering network name and password link:
2. Using the values shown on the screen, enter the following into your wireless device’s
Wi-Fi connection screen as prompted:
The Wi-Fi network SSID of the wireless network you want to use
The password for the wireless network you selected
Note: By default there is no password. If a password was configured during
setup, that password displays in the Password field.
3. Click Close.