Western Digital WD Sentinel DX4000 User Manual - Manual (Page 62)

USING THE WD SENTINEL SERVER’S FEATURES
58 WD SENTINEL DX4000
ADMINISTRATOR’S GUIDE
4. Insert the USB flash drive into the USB port of the Windows PC, and click Next.
The Prepare the USB flash drive for server recovery screen displays.
5. The USB flash drive should appear in the Select USB flash drive drop-down list. If it is
not on the list, click Refresh and search for it.
6. After locating the USB drive, click the check box to acknowledge that you know clicking
Next will delete all files and folders on the USB flash drive.
7. Click Next. The Preparing the USB flash drive for server recovery screen displays.
8. The recovery application on the DVD prepares the USB drive. This process can take up
to 15 minutes to complete. After the USB drive preparation is done, the Start your server
in recovery mode screen displays.
9. Follow the additional instructions that appear on the screen to guide you through the
recovery process: