Wasp Barcode WDI4600 2D Quick Reference Guide - Manual (Page 11)

Using the WDI4600
Quick Reference Guide 7
Using the WDI4600
The WDI4600 normally functions by capturing and decoding
codes. The reader is equipped with an internal motion-sensing
function which activates the aiming system on device motion.
The intelligent aiming system indicates the field of view which
should be positioned over the barcode:
Aiming System
Relative Size and Location of Aiming System Pattern
A red beam illuminates the label. The field of view indicated
by the aiming system will be smaller when the reader is closer
to the barcode and larger when it is farther from the code.
Symbologies with smaller bars or elements (mil size) should be
read closer to the unit. Symbologies with larger bars or ele-
ments (mil size) should be read farther from the unit.
If the aiming system is centered and the entire barcode is with-
in the aiming field, you will get a good read. Successful reading
is signaled by an audible tone plus a good-read green spot LED
indicator.
Reference the WDI4600 Product Reference Guide (PRG) for
more information about this feature and other programmable
settings.
Linear barcode 2D Matrix symbol