Tw-elements-manual_10196_8, 7affi xing the towel warmer to the wall - cont’d – WarmlyYours Elements WarmlyYours Towel Warmers User Manual
Page 8
7
Affi xing the Towel Warmer to the Wall - cont’d
WARNING
Measure all dimensions prior to rough-in and installation.
Elements™ model: TW-E4PCP
Anchor Points
*
Anchor Points
*
Pin Hole
* Note: Anchor points must be attached to a stud.
†
Note: 12” between brackets is recommended, but the top
bracket can move up to 2” vertically as desired.
Stud
12” (305mm)
Recommended†
2” (51mm)
8
7/8
” (200mm)