Affixing the towel warmer to the wall (continued) – WarmlyYours Infinity User Manual
Page 4
22
3/8
” (568mm)
electrical collar
15
1/4
”
(388mm)
8”
(203mm)
8
1/8
” (206mm)
16” (406mm)
anchor point
anchor point*
stud
stud
anchor point*
anchor point
electrical box
†
1. Affixing the Towel Warmer to the Wall (continued)
Note:
Dimensions shown are distances between the center of anchor
points. This example shows 16 inches on center construction. Your
situation may vary depending on stud spacing.
WARNING:
Locations of electrical box and anchor points may vary.
Measure all dimensions prior to rough-in and installation.
Diagram A: Anchor Points and Electric Box Location
†
Note: For hardwired model only, electrical box must be securely attached to a
stud. Plug-in model only must be installed less than 6 feet (183cm) from
properly grounded outlet. Do NOT use an extension cord.
* Note: Anchor points must be attached to a stud.
3