Blaupunkt Alaska DJ52 - Manual (Page 9)

36
Mute setting
This feature enables you to lower the
system volume instantaneously (mute).
➮
Briefly press button
3
.
“MUTE” appears on the display.
Telephone Audio/Navigation
Audio
If your car radio is connected to a mo-
bile telephone or a navigation system,
the volume will be muted as soon as
you “pick up” the telephone or the radio
relays voice output from the navigation
system and the conversation or voice
output is heard through the radio's loud-
speakers. In order for this to work, the
mobile telephone or navigation system
has to be connected to the car radio as
described in the instructions. For this,
you need adapter cable Blaupunkt no.
7 607 001 503.
To find out which navigation systems are
compatible with your car radio, please
consult your Blaupunkt dealer.
If a traffic announcement is received
during a telephone call or navigation-
system voice output, the traffic an-
nouncement will not be heard until the
conversation/voice output is over.
The volume at which telephone conver-
sations and voice output from the navi-
gation system are switched on is ad-
justable.
➮
Press the MENU button
8
.
➮
Press the button
:
repeatedly
until “TEL/NAVI VOL” appears on
the display.
Volume adjustment
The system volume can be adjusted in
steps from 0 (off) to 66 (maximum).
➮
To raise the system volume, turn
the volume control
2
to the right.
➮
To lower the system volume, turn
the volume control
2
to the left.
Setting the switch-on volume
You can set the volume at which you
wish the car radio to play when switched
on.
➮
Press the MENU button
8
.
➮
Press the or button
:
repeat-
edly until “ON VOLUME” appears
on the display.
➮
Use the buttons
:
to set the
switch-on volume.
If you select “LAST VOL”, the volume
played before the unit was last switched
off will be reactivated.
Note:
●
To protect your hearing, the maxi-
mum switch-on volume under the
“LAST VOL” setting is “38”. If the
volume was higher before the unit
was switched off and “LAST VOL”
has been selected, the volume will
be set at “38” the next time the ra-
dio is switched on.
When you have completed setting the
volume,
➮
press the MENU button
8
.
VOLUME ADJUSTMENT