Blaupunkt Alaska DJ52 - Manual (Page 17)

44
Cassette Operation
Cassette Play
●
If there is no cassette in the device
➮
Press the button
9
.
The flip-release panel opens.
➮
Insert the cassette into the cassette
slot with the open side to the right.
➮
Close the control unit.
“SDA SYNC” appears in the display.
The cassette starts playing with the side
that is facing upwards.
●
If there is already a cassette in the
device
➮
Press the SRC button
@
until
“CASSETTE” appears in the dis-
play.
The cassette is played in whichever di-
rection was last selected.
Cassette Ejection
➮
Press the button
9
.
The flip-release panel opens and the
cassette is ejected.
➮
Remove the cassette and close the
release panel
or
➮
Insert a new cassette.
Changing Direction of Play
To change between SIDE A and SIDE B
➮
Press button 2
>
.
Note:
●
At the end of the tape, the direction
of play is automatically reversed
(auto-reverse).
Skipping Tracks (S-CPS)
To skip to the next or a later track
➮
Press the button
:
one or more
times.
“CPS FF” and the number of tracks to
be skipped appear in the display. The
tape fast forwards to the next track or
the chosen later track.
To skip track backwards
➮
Press the button
:
one or more
times.
“CPS FR” and the number of tracks to
be skipped appear in the display. The
tape is rewound to the start of the
present track or the desired earlier track.
Playing a Track Repeatedly
➮
Press button 4 RPT
>
.
“REPEAT ON” appears briefly in the dis-
play. RPT lights up in the display.
When the end of the track is reached,
the tape rewinds back to the beginning
of the track. Whilst the tape is rewind-
ing, “REPEAT TRACK” appears in the
display.
To stop repeating the track,
➮
press button 4 (RPT)
>
again.
CASSETTE MODE