Blaupunkt Alaska DJ52 - Manual (Page 18)

45
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
“REPEAT OFF” appears briefly in the
display.
Play continues as normal. RPT disap-
pears from the display.
Sampling All the Tracks on a
Cassette (SCAN)
➮
Hold down the OK button
;
for
longer than two seconds.
“SCAN” appears in the display. Sam-
ples from all the tracks on the tape are
played in ascending order.
To halt the scan
➮
Press the OK button
;
a second
time.
The track that is currently being sam-
pled will continue playing.
Note:
●
The duration of samples can be
adjusted. Refer to the section on
“Setting Sample Time” under “Ra-
dio Operation”.
●
To use the S-CPS, RPT and SCAN
functions, there must be a pause of
at least three seconds between the
tracks on the cassette.
Fast Winding
Fast forward
➮
Press the button
:
.
“CAS FORWARD” appears in the dis-
play.
Fast rewind
➮
Press the button
:
.
“CAS REWIND” appears in the display.
Stopping fast winding
➮
Press the OK button
;
.
Play continues.
Note:
●
While the tape is being fast wound,
the last radio station tuned in can
be listened to. This requires the
“Radio monitor” function to be
switched on.
Switching the Radio Monitor
On / off
Note:
●
The radiomonitor can only be set if
a cassette is being played.
➮
Press the MENU button
8
.
➮
Press the or button
:
until
“RAD MONITOR” appears in the
display.
➮
Press the or button
:
to
switch the radio monitor on or off
(“RM ON” or “RM OFF”).
➮
Press the MENU button
8
or OK
;
.
Pausing During Play
To interrupt tape play
➮
Press button 1
>
.
Play is interrupted and “PAUSE” ap-
pears in the display.
➮
Press button 1
>
again to
resume play.
CASSETTE MODE