Radio mode – Blaupunkt Alaska DJ52 User Manual

Page 11

RDS function (AF, REG)

The RDS functions AF (Alternative Fre-
quency) and REG (Regional) extend
your radio's range of functions.

●

AF: If this RDS function is activat-
ed, the unit automatically tunes into
the best receivable frequency for
the station that is currently set.

●

REG: Some radio stations set
aside some of their broadcasting
time for regional programmes that
provide different regional content.
With the REG function, your car ra-
dio is prevented from switching to
alternative frequencies with a dif-
ferent regional content.

Note:
REG has to be specially activated/de-
activated in the unit's menu.

Switching REG function on/off

To use the REG function,

➮

press the MENU button

➮

Press the button

repeatedly

until “REG” appears on the display.
“OFF” or “ON” will be displayed
alongside “REG”.

➮

To switch REG on or off, press the

or button

➮

Press the MENU button

or OK

;

Switching the RDS convenience
function on/off

➮

To use the RDS AF function, press
the RDS button

The RDS convenience functions are
active when RDS lights up on the dis-
play with a symbol. When the RDS con-
venience functions are activated, “REG
ON” or “REG OFF” appears briefly on
the display.

Selecting the waveband/
memory

This unit can receive programmes
broadcast over the FM as well as MW
and LW (AM) waveband. There are
three preset memory levels for the FM
range and one each for the MW and
LW ranges. Six stations can be stored
on each memory level.

➮

In order to switch between memory
levels or wavebands, briefly press
the BND/TS button

Tuning into a station

There are various methods available for
tuning into a station.

Automatic station search mode

➮

Press the or button

The unit tunes into the next receivable
station.

Tuning into stations manually

You can also tune into stations manual-
ly.

➮

Press either the or buttons

Note:
You can only tune into stations manual-
ly if the RDS function has first been de-
activated.

RADIO MODE