Vortex Optics CROSSFIRE 3X32 CROSSBOW - CROSSBOW ILLUMINATED - Manual (Page 2)

D
C
F
A
B
E
A. Eyepiece
B. Eyepiece Lock Ring
C. Windage Adjustment Knob
D. Elevation Windage Adjustment Knob
E. Illumination Adjustment Dial
F. Objective Lens
The Vortex 3x32 Crossbow Scope
Reticle Focusing
The Vortex Crossfire 3x32 Crossbow scope uses an adjustable
eyepiece to get a clear and sharp reticle image. Set the reticle
focus this way:
1. Loosen the ridged lock ring in front of the eyepiece.
2. Look through the scope at a blank white wall or up at the sky.
3. Turn the eyepiece in or out until the reticle image is as crisp as
you can get it. Try to do this as quickly as possible, as your eye will
try to compensate for an out-of-focus reticle.
4. Tighten lock ring when done setting the reticle focus.
Once the reticle is in focus, it will not need to be focussed every
time the scope is used. However, as your eyesight may change
over time, you should re-check this adjustment periodically.
Avoid looking directly at the sun through a scope or
any optical instrument—this can cause severe and
permanent damage to your eyesight.
Caution
2 3