Vigo VG06031 User Manual

Page 9

Text mode
Original mode

MODEL VG06031

D. INSTALLING THE THRESHOLD

IMPORTANT

IN CASE THE THRESHOLD IS TOO LONG, CUT IT WITH A HACKSAW UNTIL IT FITS
THE OPENING.

1. Seal the bottom of the door threshold clip (#18) with clear silicone.

2. Seal the bottom side of the threshold (#9) with clear silicone.
3. Slide the door threshold clip (#18) to the fixed panel (#4). Align the threshold with the door

and press down firmly.

4. Screw the door threshold clip (#18) into the base or floor with 3/4" phillips screw (#19).

Silicone the cap to part (#18). [SEE FIG. 8]

FIG. 8