UVP HB-500 Minidizer - Manual (Page 8)

HB-500 Minidizer Hybridization Oven 8
Replacement Parts and Accessories
Replacement parts lists are provided below for the HB-500 Minidizer Hybridization Oven. Repairs or
replacement other than specified in the following procedures shall be done only by authorized service
personnel.
PART NUMBER DESCRIPTION QUANTITY
76-0070-02 Bottle Carousel Holder 1 Required
63-0024-02 Carousel Shaft Assembly 1 Required
68-0088-01 Carousel Pillow Block 1 Required
46-0024-02 Motor Drive Coupler Assembly 1 Required
56-0022-01 Fuse, 3AMP/250V 5x20mm (Sold Individually) 2 Required
88-0004-01 Bottle Cap and O-Ring/PTFE Seal
07-0194-01 Borosilicate glass bottle with polypropylene
cap and PTFE seal, 35 x 150 mm
58-0085-01 Power Cord (115V)
58-0085-03 Power Cord (230V)
Technical Support
UVP offers expert technical support on all UVP products. If there are any questions about product use,
operation or repair, contact UVP’s offices at the locations below.
NOTE: A Returned Goods Authorization (RGA) number must be obtained from UVP’s Customer Service
prior to returning any product.
If you are in North America, South America,
East Asia or Australia: If you are in Europe, Africa, the Middle East or
Western Asia:
Call (800) 452-6788 or (909) 946-3197, and ask
for Technical Support during regular business
days, between 7:00 am and 5:00 pm, PST. Call +44(0) 1223-420022, and ask for Customer
Service during regular business days between 9:00
am and 5:30 pm.
E-mail your message to: [email protected] or
[email protected]
E-mail your message to: [email protected]
Fax Technical Support at (909) 946-3597
Fax Customer Service at
+44(0) 1223-420561
Write to: UVP, LLC. 2066 W. 11 th Street, Upland,
CA 91786 USA
Write to: Ultra-Violet Products Ltd. Unit 1, Trinity Hall
Farm Estate, Nuffield Road, Cambridge CB4 1TG UK