UVP C-75 - Manual (Page 8)

Chromato-Vue Cabinets
8
4. Check the circuitry for open circuit conditions (see C-65 Schematic for the wiring diagram). Correct any deviating
conditions.
5. If the lamp still will not light, replace the ultraviolet tube or white light as appropriate.
ACCESSORIES
A variety of products are available for use with these cabinets. Contact UVP for ordering information.
Transilluminators: The bottom panel the cabinet can be removed and the cabinet placed over a transilluminator.
The High Performance 25 watt Ultraviolet Transilluminators gives a variety of filter sizes (20x20cm up to 20x24cm)
and wavelengths from which to choose. Part numbers can be obtained from UVP.
Eyewear: UVP eyewear line consists of spectacles, goggles and faceshield for eye protection.
UVC-303 Spectacles 98-0002-01
UVC-503 Goggles 98-0002-02
UVC-803 Face Shield 98-0002-04
UV Meter: UV intensity measuring instruments measure the intensity of UV light.
UVX Radiometer 97-0015-02
UVX-25 Sensor (254nm) 97-0016-01
UVX-31 Sensor (302nm) 97-0016-04
UVX-36 Sensor (365nm) 97-0016-02
WARRANTY
UVP’s quality products are guaranteed to be free of defects in materials, workmanship and manufacture for one (1)
year from date of purchase. Consumable and disposable products, including but not limited to tubes and filters, are
guaranteed to be free from defects in manufacture and materials for ninety (90) days from the date of purchase. This
warranty does not supersede any statutory rights that may be available in certain countries.
If equipment failure or malfunction occurs during the warranty period, UVP shall examine the inoperative equipment
and have the option of repairing or replacing any part(s) which, in the judgment of UVP, were originally defective or
became so under conditions of normal usage and service.
No warranty shall apply to any instrument, or part thereof, that has been subject to accident, negligence, alteration,
abuse or misuse by the end-user. Moreover, UVP makes no warranties whatsoever with respect to parts not supplied
by UVP or that have been installed and/or serviced other than in strict compliance with the instructions appearing in
the operational manual supplied to the end user.
In no event shall UVP be responsible to the end user for any incidental or consequential damages, whether
foreseeable or not, including but not limited to property damage, inability to use equipment, lost business, lost profits,
or inconvenience arising out of or connected with the use of instruments produced by UVP. Nor is UVP liable or
responsible for any personal injuries occurring as a result of the use, installation and/or servicing of equipment.