Unisteer 8010780-02 Chevelle Power Rack & Pinion Kit 1964-67 - Manual (Page 2)

pg. 2
655680
Kit Contents:
# Part Number Description Quantity
1 8010770-01 Rack & Pinion Assembly 1
1 8060700 Pump Kit 1
2 8021580 Hose Kit w/ Reservoir 1
3 8022270 Shaft Support Bracket 1
4 543790 Upper Shaft 1
5 543800 Lower Shaft 1
6 620630 Shaft Install Kit 1
7 8050760 Shaft Support w/ Nut 1
8 8050250 9/16”-30 x ¾”-DD U-Joint 1
9 8050880 ¾”-36 x ¾”-DD U-Joint 1
10 8051410 ¾” x 9/16”-30 U-Joint 1
Disassembly:
1. Disconnect negative battery cable before installation.
2. Raise front of vehicle off ground & center & lock steering wheel.
3. Remove front wheels & remove power-steering lines at pump or gearbox.
4. Drain fluid.
5. From under hood, remove pinch bolt at gearbox & shaft union & separate.