Unisteer 8010280-01 Chevy Impala 1965-1966 - Manual (Page 7)

Page 7 656980
8. You are now ready to install the rack and pinion. Your rack has come assembled to the main
mounting bracket. Put the rack and bracket up in place, sliding the passenger side onto the bolts
sticking through the frame rail. Add washers and nuts to bolts. Then bolt the rack bracket to the
passenger side bracket already installed by using the supplied three bolts and washers. The
passenger side bracket is threaded so you can just bolt the rack bracket right to it. Torque all
hardware to 45ft. lbs.