Therma-Tru Doors Finishing Instructions - Manual (Page 12)

Finishing Instructions
2.12 2014 SITE 2
Doorlite Frame Finishing
9/5/07
DLLBLPVC
TO REMOVE GLAZING COMPOUND:
TO FINISH THE FRAME AROUND GLASS:
PAINT:
STAIN AND TOPCOAT Therma-Tru Finishing
System Kit . Therma-Tru Finishing System Kit
www.thermatru.com
1-877-99-STAIN (997-8246).
Wet with window cleaner or water first. Use razor
blade to score glazing along edge of frame. Holding razor blade at a 45° angle, scrape
glazing from glass. Wipe remaining residue off with window cleaner or mineral spirits.
Clean first with mild detergent and water
or TSP solution. Rinse well and allow to dry.
Prime first with an alkyd- or acrylic-based primer and allow to dry. Then paint with
a high quality, exterior grade, acrylic-latex house paint, OR,
(Fiber-Classic products only): Use a
To order a , contact your local
Therma-Tru dealer, visit us on the Internet at or call toll free at
See the Finishing System Instruction brochure or the
Corner Door Tag for more detailed application information.
®
only
THERMA-TRU DOORS Technical Services Department
1750 Indian Wood Circle • Maumee, Ohio 43537 1-800-THERMATRU (843-7628)
•
• • www.thermatru.com
ASSEMBLED IN MEXICO
PVC FRAMES
Do not finish a dark color •
Do not use behind a storm door •
CAUTION:
DECORATIVE GLASS:
WARRANTY INFORMATION:
Exterior frame surface requires field finish for protection.
of installation. Failure to do so will void warranty. To prevent
distortion from heat, DO NOT finish in dark colors or install behind storm doors. Finishing in
dark colors or installing behind storm doors will void warranty.
Our Therma-Tru artisans have hand-crafted the decorative glass in
this door system, and as with any hand-crafted product, no two are alike. Slight irregularities
and imperfections should not be considered defects.
This product is covered by a limited warranty. The warranty
does not cover defects that are the result of finishing or installation not in accordance with our
instructions. For further information contact:
PAINT OR STAIN AND
CLEAR COAT within 6 Months