Telematrix DC550 - Manual (Page 20)

Programming the Stored Record Memory
The Spectrum PLUS
TM DC550 allows for up to ten (10) number records to be s tored in the
LCD memory for frequently dialed calls. This section describes the programming for the ten
(10) LCD Memory locations. These programmed numbers will be saved in LCD Memory.
Programming Location
Memory Records
The telephone has the ability to s tore
10 te lephone number s i nto me mory
for future dialing.
1. Press the
“PROGRAM” key (Figure
1). Press the “UP” or “DOWN”
key until the display reads
“MEMORY DIAL NUMBERS?”
(Figure 2).
2. To ac tivate, p ress the “
SELECT”
key (Figure 3).
3. Select a memory location by scroll-
ing through the LCD Display. Enter
the number to be saved. Be sure to
enter a “1” and ar ea co de wh en
required by y our a reas te lephone
company (Figure 4).
4. Press
“SAVE” to s ave the number
in memory. Note that the first saved
record will be store in location “M0”.
The second and third records will be
stored i n “M1”, “M2” …”M09” l oca-
tions (Figure 5).
5. Press
“EXIT” to exit the p rogram
mode or p ress “ UP” or “DOWN” to
continue s crolling t hrough the
program mode. (Figure 6)
Save Select Exit
PROGRAM
Figure 1
THEN PRESS
↓ = P r e v ( S e l e c t ) N e x t = ↑
M E M O R Y D I A L N U M B E R S ?
Figure 2 DISPLAY WILL READ
Save Select Exit
Figure 3 PRESS SELECT KEY
Save Select Exit
Figure 5 PRESS SAVE KEY
M 0 : 1 7 1 9 6 3 8 8 8 2 1 ( S a v e )
M e m o r y D i a l N u m b e r s :
Figure 4 ENTER NUMBER TO BE STORED
Save Select Exit
Figure 6 PRESS ARROW KEY OR EXIT
20